WS 3/64″ Wire Econo Gripper
The WS Econo Gripper mounts material vertically with a nylon tip set screw.
The WS Econo Gripper mounts material vertically with a nylon tip set screw.
The WS-A2.0WMBL is a 2″ diameter mounting plate, counter-bored to allow hardware attachment with a 5/16-18 threaded low head screw.
The WS Double Gripper Wire Connector is an aluminum Wire Connector for holding materials between wires. The grippers can be positioned at any angle during installation. The assembly attaches [...]
The WL-A42 angled wire wall mount is designed to hold wire parallel to the mounting surface or up to 40 degrees away from the surface. Our WL swaged wire can be purchased here and cut to your [...]
The WL Panel Gripper is an aluminum gripper that holds material. Material is secured with a nylon tip set screw and the clip attaches to a capstan connection pin with a cone point set screw. The [...]
The WL Panel Gripper with Mounting Plate is designed to mount material perpendicular to a surface. The clip may be positioned at any angle. Panels are secured in place with a nylon tip set screw.
The WL-A40 top mount turnbuckle can be used as a top or bottom connection and provides tension for spans up to 8′ long. Our WL swaged wire can be purchased here and cut to your desired [...]
The StructureLite Wall Track End Cap locks into the end of StructureLite wall track with a 6-32 flat point hex socket set screw.
The Wall Anchor Assembly is a threaded wall board anchor assembly with a 5/8″ long 10-24 wood hanger screw, a polypropylene anchor, and a 1/4″ long 5/16-18 thread adapter.
The StructureLite Slotted Ball Traveler is an open traveler designed for 1-1/4″ profile. This part is equipped with connection cap that is tapped 5/16-18 and a nylon tip set screw to grip [...]