EZ 3/8″ Rod Saddle Gripper
The EZ 3/8″ Rod Saddle Gripper mounts material to our 3/8″ rod. The rod is secured with a flat point set screw. Your material is secured by a nylon tip set screw
The EZ 3/8″ Rod Saddle Gripper mounts material to our 3/8″ rod. The rod is secured with a flat point set screw. Your material is secured by a nylon tip set screw
The EZ 1/8″ Wire Wire Top Turnbuckle (Parts Only) is an unassembled surface mount for 1/8″ wire. The turnbuckle easily adjusts wire tension and locks in place with a set screw. NOTE: [...]
The EZ 3/8″ Rod Connector is an aluminum rod connector for 3/8″ rod, secured with a cone point set screw. Other hardware may be mounted with a 5/16-18 stud.
The EZ-PW pulley wheel can accommodate 3/64″ or 1/8″ wire and attaches to the pulley grip with a low head screw that is tightened to lock the wheel in place.
The EZ 1/8″ Wire Gripper secures 1/8″ with a flat point set screw.
The EZ 1/8″ Wire Bottom Turnbuckle applies tension to 1/8″ wire and locks in place with a side-mounted set screw. This assembly mounts to a 2-1/2″ base plate and may be used at [...]
The EZ 1/8″ Wire 90 Degree Wall Turnbuckle easily adjusts tension on 1/8″ wire and locks in place with a set screw. The distance from the mounting surface to wire center is [...]
The EZ 1/8″ Wire Angled Wire Turnbuckle can be set to a desired angle and is designed to be the bottom connection of a 1/8″ wire system. The turnbuckle applies tension to a wire [...]
The EZ 1/4″ Rod StandOff with Cap is designed to attach panels in front of 1/4″ rod. The rod connector uses a SO-CAP9 with a flat point set screw to secure panels and will require a [...]
The EZ 1/4″ Rod Thru-mount secures to 1/4″ rod and fastens in place with a flat point set screw.