Search

The WS Saddle Gripper secures materials with a nylon tip set screw.

The WS Horizontal Wire Connector Type 1 is a wire connector that attaches WS wire to spreader bars, clips or other hardware using a set screw installed from the part’s end.

The WS-A23 attaches to wire with a flat point set screw and secures material with 5/8″ diameter cap. Specify material thickness for stud length. This assembly will require a 3/8″ hole [...]

The WS-AEPG is designed to grip materials. The assembly is mounted to wire with a flat point set screw and material is held in place with a cone point set screw.

Our WS Econo Double Vertical Clip mounts 1/8″ or 1/4″ material on both sides of a wire. Nylon tip set screws hold material in place.

The WS Econo Gripper mounts material vertically with a nylon tip set screw.

The WS-A2.0WMBL is a 2″ diameter mounting plate, counter-bored to allow hardware attachment with a 5/16-18 threaded low head screw.

The WS Double Gripper Wire Connector is an aluminum Wire Connector for holding materials between wires. The grippers  can be positioned at any angle during installation. The assembly attaches [...]

The WL-A42 angled wire wall mount is designed to hold wire parallel to the mounting surface or up to 40 degrees away from the surface. Our WL swaged wire can be purchased here and cut to your [...]

The WL Panel Gripper is an aluminum gripper that holds material. Material is secured with a nylon tip set screw and the clip attaches to a capstan connection pin with a cone point set screw. The [...]